Name       <= Enter data in yellow cells only, selection dropdowns in orange.      
  Phone       <=        
  Email       <=
  Top m
  Yacht/Description       <=        
              Room at top m
  Furler System
               
  Min bot (furler) m     <= Minimum furler drum allowance.   Tension allowance m
  Min top (swivel) m     <= Minimum upper swivel allowance.   Top of swivel m
                Cable pin m
  1 Max Hoist - Upper clip B/P to tack line B/P. m   <= Enter data in yellow cells only.   Head of sail m
    Lower furler drum allowance/cable pin height. m   <=          
    Upper swivel allowance. m              
  2 Max Leech. m   <=          
  3 Not Required.                  
  4 Max Foot. m   <=          
  5 Not Required.                  
  6 Not Required.                  
                       
  Option 1 Luff m         Luff  length m
  Difference to max finished luff. m         Cable length m
    Cable length B/P to B/P. m   <= Best fit based on (Max Hoist - furling gear - Tension Allowance).        
    Leech m              
    Foot m              
    Area m2              
    Clew height above deck. m              
    Sheeting position relative to "Max Foot". m   <= - value is sheeting point fwd of "Max Foot", + value is sheeting point aft of "Max Foot".        
                       
                       
                       
                       
                     
                Tack of sail m
                Cable pin m
                     
                  Bottom 0 m
               
           
     
  Use lookup bot & top True > 0            
                 
  Use Vertical Measurement & Spinnaker Tack Length True > 0            
  Vertical Measurement              
  Spinnaker Tack Length              
                 
               
  Recycled sail summary.              
  Max cable length. m          
  Max luff length. m          
  Tack Angle Cosine(Tack angle)       Suitable sails have Cosine(Tack angle) > this value.      
                 
               
 
 
 
   
   
   
   
   
[No canvas support]